come in
所在版块：社会百科 发贴时间：2003-11-29 14:07  评分:

用户信息
复制本帖HTML代码
高亮: 今天贴 X 昨天贴 X 前天贴 X 
1. Make sure the ethernet card is recognized and driver module is loaded on startup. can u paste the result of the following two commands:
lspci --- List all pci device
lsmod --- List loaded modules

2. If your ethernet card is not well configured, configure again using "netconfig". If you have a static IP, just give all the informations, if using DHCP, then choose dhcp.

3. After configuration, restart the networking

/etc/init.d/network restart


Good luck

.
欢迎来到华新中文网，踊跃发帖是支持我们的最好方法!

Put your OWN COOL signature here!
　相关帖子 我要回复↙ ↗回到正文
Problem of Determining IP information for eth0 － xuechlai 　2003-11-29 13:41 (10278 bytes , 669reads )
come in － Cowboy 　2003-11-29 14:07 (466 bytes , 323reads )
ethernet card recognized, driver modul loaded － xuechlai 　2003-11-29 14:48 (3095 bytes , 327reads )
suggestion － Cowboy 　2003-11-29 16:03 (150 bytes , 383reads )
I partly solove the problem, but... － xuechlai 　2003-11-29 17:06 (552 bytes , 259reads )
Great, the problem is solved thanks to your help. － xuechlai 　2003-11-29 17:51 (53 bytes , 236reads )
try － Cowboy 　2003-11-29 17:19 (220 bytes , 296reads )
你好久没现身了啊 － 百及子 　2003-11-29 14:26 (41 bytes , 263reads )
现在喜欢潜水了 － Cowboy 　2003-11-29 16:03 (0 bytes , 212reads )